source: branches/typed-asm/abcl/install-sh

Last change on this file was 2, checked in by piso, 22 years ago

Initial checkin.

File size: 5.5 KB
Line 
1#!/bin/sh
2#
3# install - install a program, script, or datafile
4# This comes from X11R5 (mit/util/scripts/install.sh).
5#
6# Copyright 1991 by the Massachusetts Institute of Technology
7#
8# Permission to use, copy, modify, distribute, and sell this software and its
9# documentation for any purpose is hereby granted without fee, provided that
10# the above copyright notice appear in all copies and that both that
11# copyright notice and this permission notice appear in supporting
12# documentation, and that the name of M.I.T. not be used in advertising or
13# publicity pertaining to distribution of the software without specific,
14# written prior permission.  M.I.T. makes no representations about the
15# suitability of this software for any purpose.  It is provided "as is"
16# without express or implied warranty.
17#
18# Calling this script install-sh is preferred over install.sh, to prevent
19# `make' implicit rules from creating a file called install from it
20# when there is no Makefile.
21#
22# This script is compatible with the BSD install script, but was written
23# from scratch.  It can only install one file at a time, a restriction
24# shared with many OS's install programs.
25
26
27# set DOITPROG to echo to test this script
28
29# Don't use :- since 4.3BSD and earlier shells don't like it.
30doit="${DOITPROG-}"
31
32
33# put in absolute paths if you don't have them in your path; or use env. vars.
34
35mvprog="${MVPROG-mv}"
36cpprog="${CPPROG-cp}"
37chmodprog="${CHMODPROG-chmod}"
38chownprog="${CHOWNPROG-chown}"
39chgrpprog="${CHGRPPROG-chgrp}"
40stripprog="${STRIPPROG-strip}"
41rmprog="${RMPROG-rm}"
42mkdirprog="${MKDIRPROG-mkdir}"
43
44transformbasename=""
45transform_arg=""
46instcmd="$mvprog"
47chmodcmd="$chmodprog 0755"
48chowncmd=""
49chgrpcmd=""
50stripcmd=""
51rmcmd="$rmprog -f"
52mvcmd="$mvprog"
53src=""
54dst=""
55dir_arg=""
56
57while [ x"$1" != x ]; do
58    case $1 in
59  -c) instcmd="$cpprog"
60      shift
61      continue;;
62
63  -d) dir_arg=true
64      shift
65      continue;;
66
67  -m) chmodcmd="$chmodprog $2"
68      shift
69      shift
70      continue;;
71
72  -o) chowncmd="$chownprog $2"
73      shift
74      shift
75      continue;;
76
77  -g) chgrpcmd="$chgrpprog $2"
78      shift
79      shift
80      continue;;
81
82  -s) stripcmd="$stripprog"
83      shift
84      continue;;
85
86  -t=*) transformarg=`echo $1 | sed 's/-t=//'`
87      shift
88      continue;;
89
90  -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
91      shift
92      continue;;
93
94  *)  if [ x"$src" = x ]
95      then
96    src=$1
97      else
98    # this colon is to work around a 386BSD /bin/sh bug
99    :
100    dst=$1
101      fi
102      shift
103      continue;;
104    esac
105done
106
107if [ x"$src" = x ]
108then
109  echo "install:  no input file specified"
110  exit 1
111else
112  true
113fi
114
115if [ x"$dir_arg" != x ]; then
116  dst=$src
117  src=""
118 
119  if [ -d $dst ]; then
120    instcmd=:
121    chmodcmd=""
122  else
123    instcmd=mkdir
124  fi
125else
126
127# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
128# might cause directories to be created, which would be especially bad
129# if $src (and thus $dsttmp) contains '*'.
130
131  if [ -f $src -o -d $src ]
132  then
133    true
134  else
135    echo "install:  $src does not exist"
136    exit 1
137  fi
138 
139  if [ x"$dst" = x ]
140  then
141    echo "install:  no destination specified"
142    exit 1
143  else
144    true
145  fi
146
147# If destination is a directory, append the input filename; if your system
148# does not like double slashes in filenames, you may need to add some logic
149
150  if [ -d $dst ]
151  then
152    dst="$dst"/`basename $src`
153  else
154    true
155  fi
156fi
157
158## this sed command emulates the dirname command
159dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
160
161# Make sure that the destination directory exists.
162#  this part is taken from Noah Friedman's mkinstalldirs script
163
164# Skip lots of stat calls in the usual case.
165if [ ! -d "$dstdir" ]; then
166defaultIFS=
167'
168IFS="${IFS-${defaultIFS}}"
169
170oIFS="${IFS}"
171# Some sh's can't handle IFS=/ for some reason.
172IFS='%'
173set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
174IFS="${oIFS}"
175
176pathcomp=''
177
178while [ $# -ne 0 ] ; do
179  pathcomp="${pathcomp}${1}"
180  shift
181
182  if [ ! -d "${pathcomp}" ] ;
183        then
184    $mkdirprog "${pathcomp}"
185  else
186    true
187  fi
188
189  pathcomp="${pathcomp}/"
190done
191fi
192
193if [ x"$dir_arg" != x ]
194then
195  $doit $instcmd $dst &&
196
197  if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
198  if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
199  if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
200  if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
201else
202
203# If we're going to rename the final executable, determine the name now.
204
205  if [ x"$transformarg" = x ] 
206  then
207    dstfile=`basename $dst`
208  else
209    dstfile=`basename $dst $transformbasename | 
210      sed $transformarg`$transformbasename
211  fi
212
213# don't allow the sed command to completely eliminate the filename
214
215  if [ x"$dstfile" = x ] 
216  then
217    dstfile=`basename $dst`
218  else
219    true
220  fi
221
222# Make a temp file name in the proper directory.
223
224  dsttmp=$dstdir/#inst.$$#
225
226# Move or copy the file name to the temp name
227
228  $doit $instcmd $src $dsttmp &&
229
230  trap "rm -f ${dsttmp}" 0 &&
231
232# and set any options; do chmod last to preserve setuid bits
233
234# If any of these fail, we abort the whole thing.  If we want to
235# ignore errors from any of these, just make sure not to ignore
236# errors from the above "$doit $instcmd $src $dsttmp" command.
237
238  if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
239  if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
240  if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
241  if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
242
243# Now rename the file to the real destination.
244
245  $doit $rmcmd -f $dstdir/$dstfile &&
246  $doit $mvcmd $dsttmp $dstdir/$dstfile 
247
248fi &&
249
250
251exit 0
Note: See TracBrowser for help on using the repository browser.